diff --git a/README.md b/README.md
index c464a18..524c25d 100644
--- a/README.md
+++ b/README.md
@@ -6,58 +6,58 @@
 
 ## About
 
-### 1. Why change
+#### 1. Why change
 
-	To write or edit computer code, program an arduino etc... we use IDE (integrated development environment)
-	Many very complete graphic software exist to do that like VScode from microsoft or Atom.
+To write or edit computer code, program an arduino etc... we use IDE (integrated development environment)
+Many very complete graphic software exist to do that like VScode from microsoft or Atom.
 
-	So why not use them ? They have drawbacks:
+So why not use them ? They have drawbacks:
 
-	* They are resource intensive, lots of RAM (~1.3 GB, about 18,000 times more than the Apollo 11 mission that sent the first men to the moon :/ )
-	* They are quite difficult to debug because of the large abstraction layers that make them up
-	* They don't work without a graphical system (through ssh, on a server or a Raspberry Pi)
-	* It is sometimes difficult to make them do something simple if it was not planned by the developers
-	* Its frequent updates sometimes impose changes in working habits (new interfaces, new default configuration, new paths etc.)
+* They are resource intensive, lots of RAM (~1.3 GB, about 18,000 times more than the Apollo 11 mission that sent the first men to the moon :/ )
+* They are quite difficult to debug because of the large abstraction layers that make them up
+* They don't work without a graphical system (through ssh, on a server or a Raspberry Pi)
+* It is sometimes difficult to make them do something simple if it was not planned by the developers
+* Its frequent updates sometimes impose changes in working habits (new interfaces, new default configuration, new paths etc.)
 
 
-	So which solution? We suggest you use one of the historical command line text editors (vi, Vim) to make your own IDE :)
+So which solution? We suggest you use one of the historical command line text editors (vi, Vim) to make your own IDE :)
 	
-	Advantages :
+Advantages :
 
-	* Lightweight, ~15Kb which is 4.6 x less than Apollo 11 and 83000 times less than VSCODE!!!
-	* Configurable, you can configure everything in text files from already shared and popular configurations
-	* Stable, it only evolves without breaking the ergonomic continuity (always the same commands and shortcuts since 1991 for vim and 1976 for vi :) same for the configurations which remain valid since the beginning...)
-	* Usable through SSH on servers or very light computers (Raspberry Pi, etc.)
-	* Rock solid, crashes must exist, but I've never even heard of them
+* Lightweight, ~15Kb which is 4.6 x less than Apollo 11 and 83000 times less than VSCODE!!!
+* Configurable, you can configure everything in text files from already shared and popular configurations
+* Stable, it only evolves without breaking the ergonomic continuity (always the same commands and shortcuts since 1991 for vim and 1976 for vi :) same for the configurations which remain valid since the beginning...)
+* Usable through SSH on servers or very light computers (Raspberry Pi, etc.)
+* Rock solid, crashes must exist, but I've never even heard of them
 
 #### 2. Avantages of this solution
 
-	VimsCode is an IDE with vim for beginner or expert
+VimsCode is an IDE with vim for beginner or expert
+
+* VimsCode use arduino-cli, idf-esp and platform.io-cli for remplace VScode only in terminal 
+* Very easy to use 
+* Very easy to install
 
-	* VimsCode use arduino-cli, idf-esp and platform.io-cli for remplace VScode only in terminal 
-	* Very easy to use 
-	* Very easy to install
-	
 	![Example-picture](/pictures/image.png)
 
 ## Quick Start
 
 #### 1. Introduction:
 
-	Installation requires [git, wget, flex, bison, gperf, python3, python3-venv, cmake, ninja-build, ccache, libffi-dev, libssl-dev, dfu-util, libusb-1.0-0] 
+Installation requires [git, wget, flex, bison, gperf, python3, python3-venv, cmake, ninja-build, ccache, libffi-dev, libssl-dev, dfu-util, libusb-1.0-0] 
 	```
 	sudo apt update
 	sudo apt install git, wget, flex, bison, gperf, python3, python3-venv, cmake, ninja-build, ccache, libffi-dev, libssl-dev, dfu-util, libusb-1.0-0, elinks
 	```
 #### 2. Set up VimsCode
 
-	git clone https://git.cohabit.fr/bastien/VimsCode.git 
+git clone https://git.cohabit.fr/bastien/VimsCode.git 
 	
-	After clone don't forgot to rename "vimrc-conf" -> ".vimrc" and "/vim-conf" -> "/vim"
+After clone don't forgot to rename "vimrc-conf" -> ".vimrc" and "/vim-conf" -> "/vim"
 
 #### 3. Install Plugins:
 
-   Launch `vim` and run `:PluginInstall`
+Launch `vim` and run `:PluginInstall`
 
 ## Docs